boiler supplier

diesel fired boiler and biomass fired boiler

Coal-fired diesel fired boiler and biomass fired boilers to gas boilers benefits and precautions With the rapid development of national energy-saving environmental protection, the traditional coal-fired boiler can not meet the needs of the times. Therefore, the coal-fired boiler biomass boiler or gas boiler has become in many boiler user's choice. Before the transformation, to understand the difference between .1 and gas boiler fired boiler. Circulating fluidized bed combustion boiler fired by coal crushing device fluidized combustion process, the coal by crushing device percutaneously into the bunker through a the spreading coal coal injecting air into the furnace; circulating ash by heating, fluidized combustion process. When the coal into a gas fuel is injected directly into the combustor for combustion. 2. Combustion of Coal is mainly composed of C, H, O, N, S, ash and moisture and other elements. Generated when coal SO2, SO3, NOx ash and moisture, and SO2, SO3, NOx from flue gas emitted into the atmosphere, pollute the environment and cause harm to humans. The main components of the exhaust gas and coke are CO and H2. The main produce CO2 and H2 post-combustion, much lower than coal-fired boiler SO2, SO3 and NOX emissions. 3. Ventilation pressurized combustion coal combustion boiler used in a combustion mode. The bottom of the combustion process through the induced draft fan with fan and completed. In the combustion of coal, it requires a lot of air. Gas under a slight positive pressure in the boiler or burner slightly negative pressure, which requires less airflow. Burner air may be pre-mixed with natural gas. 4. coal boiler control reasons, material thickness, amount of wind, the wind volume, wind and other than coal, coal-fired boiler is difficult to automatically adjust the operating parameters of the boiler according to the load. However, fewer factors gas boiler, the burner valve can be adjusted according to the size of the load, easy to implement automatic control. Coal-fired boiler to a gas boiler Notes: Main results are as follows: (1) small boiler, the coal-fired boiler to a gas boiler, i.e. the negative pressure of combustion from the original to the current combustion slight positive pressure, and must pay attention to the furnace wall structure sealing problems. Closely related (2) selection and arrangement of the burner and furnace, the degree of filling of the flame in the furnace is preferably not formed dead air, to avoid the interference of adjacent flame burners, to avoid interference from adjacent burner flame. Unburned gas - air mixture should not be in contact with a heated surface, in order to avoid incomplete combustion. Gas combustion. Gas burner arrangement disposed conduit and ducts should be considered reasonable gas pipe and duct arrangement, ease of operation, inspection and maintenance. (3) the transformation of coal-fired boilers is mechanized layered gas boiler should be removed before the arch and the arch, and the bottom heating surface increases, in place of the grate, the grate to prevent overheating. Gas Velocity (4) on heat transfer surface of the fly ash is not restricted abrasion conditions, convection heating surface heat transfer coefficient is increased, increasing the pressure in the boiler where H is unduly increased. Boiler erosion surface. At this time, the capacity of the boiler should be noted that the steam separator to ensure the quality of the steam.

In early 2013, fast diesel fired boiler and biomass fired boiler is a food processing company Luohe a 10-ton condensing steam boiler installed integrally cloud service monitoring module, by monitoring the data found in March, the maximum pressure in the boiler set small deviation, the small boiler load adjustment range, and it uses a continuous replenishment way. When such a large load changes, the burner will start and stop frequently, adversely affect the boiler. After the burner system to monitor working properly, timely communication with customers, to help customers put pressure adjusted to the maximum deviation of the normal range. Then return to the display data safe range, the maximum starting frequency is reduced to the burner 4 times / hour from 8 times / hour, reduced by the mean starting frequency of 3.7 times / hr 1 / hr reported in June. At the same time gas consumption decreased by 10% to obtain the customer's trust and recognition.

CFB Boiler for thermal power station mainly has two types, one is coal fired CFB diesel fired boiler and biomass fired boiler and the other is biomass fired CFB boiler. Although biomass fired CFB boiler is environmentally friendly and energy-saving, it has a higher requirement to the biomass energy, such as size, dryness, and it is difficult to reach the standards. Therefore, coal fired CFB boiler is popular in thermal power plant. ZG Boiler is the coal fired CFB boiler manufacturer, supplier and exporter and we can supply customers coal fired CFB boilers with advanced technology, high quality and excellent service.

Bagasse fired steam diesel fired boiler and biomass fired boiler is a type of biomass fired steam boiler. Recent years, with the development of the economy, people begin to seek for a healthy lifestyle. Environment protection and sustainable development have become the common sense. Biomass as the fourth largest energy after oil, gas and coal, is becoming more and more popular thanks to its renewable and environmentally friendly. ZG Boiler is the bagasse fired steam boiler manufacturer in China and we can supply customer SZL series bagasse fired steam boiler, DZL series bagasse fired steam boiler and bagasse fired power plant boiler.

Related Information